Disk harrow of GD-3.6
- Customer pickup,
- Courier
- In detail
- TypeDisc harrow
In recent years, in agriculture of many countries farmers avoid plowing, carrying out a deep disking of the soil as the main operation. Using this technology and observing a crop rotation, it is possible to make a plowed land once in four years. As a result expenses of time and fuel decrease. And also moisture losses decrease, and process of a soil erosion is excluded.
The disk harrow meeting the requirements of the new technology released by JSC Moldagrotekhnika is GD-3,6. The harrow is intended for processing of soils after cleaning of various cultures, processing of layers after plowing, integral lands, and also hulling of an eddish.
The design features of a harrow of GD-3.6 providing it above-mentioned advantages:
1. Replaces plowing, due to processing of the soil with depth to 20 cm that is reached by the following features:
- V-shaped arrangement of batteries;
- adjustment of an angle of attack from 15 to 30 degrees;
- harrow weight in 3300 kg provides pressure upon each disk of 115 kg (BDT-3 and BDT-7 on only 61 kg).
2. Equipment of a harrow the crushing module which does it by the multioperational unit, consists from:
- Two passive mills - the lumps providing dyeing remaining after a disking;
- Two zubovy modules - the massifs providing leveling, creates the layer interfering moisture evaporation.
As a result thanks to these two operations we receive well processed layers and we exclude operation of cultivations.
3. Maintenance of humidity of the soil;
4. Using a harrow of GD-3,6 it is received absolutely high-quality processing of the soil, from the agrotechnical point of view, for sowing works, and after a plowed land it is necessary to carry out additional works for alignment, cultivation and consolidations of the soil;
5. Economy of fuel. It is necessary for plowing for 20,1 l/hectare, and when using a harrow only of 9 l/hectare, we receive economy on processing of 100 hectares in 1,11 tons diesel fuel. Plus economy of fuel and time due to reduction of technological operations;
6. Productivity increases. Plowing productivity when using PLN 3-35 makes 0,7 hectares/h, and when using a harrow - 3,17 hectares/h, the economy of processing of 100 hectares is 111,5 h;
7. Increase of frame designs of the unit thanks to welding among a kargon (72% argon and 18% of CO2) an obmednenny wire.
Economic raschetypo to comparison with plowing:
Surface |
Indicator |
PLN-3,35 |
GD-3,6 |
1 hectares |
Consumption l/hectare fuel |
20,1 |
9 |
Economy |
11,5 l/hectare |
||
100 hectares |
1150 l |
||
1 hectares |
Working hours |
70 min. |
20 min. |
Economy |
50 min. |
||
100 hectares |
83 hours |
- reductions of technological passes,
- decrease in specific fuel consumption by Hectare,
- increase of productivity;